Friday, January 29, 2010

TT Hongli MG 1/100 Strike Noir Review - Part 1

*This is the lowest price you should be able to get it for in M'sia. Normal shop price will get as high as somewhere around RM80.

I bought this one at the same time when I bought the TT Hongli PG WZC last month at Chow Kit. It was the only MG they had there and luckily, I wanted it. Looking at the box itself, I noticed that this is TT Hongli's first MG.

GAT-X105E - Strike Noir (Gundam)
Pilot: Sven Cal Bayan
Height: 17.72m
Weight: 90.51t

About the Gundam:
Strike Noir is an upgraded Strike, improving various functions from its predecessor. Its piloted by a natural, Sven Cal Bayan in the SEED OVA SEED C.E. 73 Stargazer. Read the manual scans (if you dare) for further information. =)

Part 1: Box, Box Open, Runners, Manual Scans & Building
Part 1.5: Clear Stickers & Decals
Part 2: Articulation, Gimmicks, Action and Conclusion

Read on for the box, box open, runners, manual scans and building process.

EDIT (30/01/10): Added some more detailed explanations.
EDIT (02/02/10): Wrong body part name for elaboration on the legs... knee guards, not the ankle guards. ^^;

Part 1: Box
Just like the other two I have reviewed recently, I had to take the photos while in the hotel. The shots came out pretty nice though.

Part 2: Box Open!
As per usual, TT Hongli is VERY stingy with platic bags. There are only TWO plastic bags used and the runners are pressed onto each other VERY RIGHTLY. Not a good thing. Because of that, some parts came off the runners already...

Part 3: Runners
Note that some of the runners have duplicates. Also, note that the runners are mostly in a matt like color where it doesn't shine like a Bandai original. Good or bad, depends on your preference.

Part 4: Manual Scans

Enjoy the rather large and hopefully very readable manual scans this time. I feel it is better translated than the Destiny one overall. ^^;

Part 5: Building Process
Make sure you have a knife and superglue ready before building any bootleg. You'll also need a screwdriver for this one as well. Plus, some good ol' patience doesn't hurt...

Part 5.1: Torso
At first I wanted to avoid using the screws for the shoulders but it seems that it needs it or else it will be VERY loose. OTL.


The armor parts are actually a little different than the Strike. The cockpit hatch has also been improved! The chest vents are little annoying to put on though.

As you can see, the exhaust vents also has newer parts. This makes the final product closer looking to the boxart especially for us OOB-ers. ^^

Part 5.2: Head
I actually almost lost the black part shown in the second shot. @_@ Luckily I managed to find it.
Also, the V-Fin is a little hard to put in though but not impossible. The face needs a little extra effort too...


Part 5.3: Arms
Note that I didn't push the whole top armor part for the arms in the shot above. I already fixed that though. ^^; I noticed that the elbow is a little loose... hopefully it won't cause any problems later...

The shoulders have been modified from the Strike. Sadly, it looses compatibility to two of the Striker packs because of the thrusters...
If you want to, please put some superglue for the yellow parts to prevent them from dropping off...

Part 5.4: Legs
The feet have been modified from the Strike as well. They are slimmer and has some added functions.

Some changes in appearance for the armor parts. The ankle guards feels less "wonky" too... but we'll see that after I start actually playing with it. >_>
As an early note, the sliding armors on the thighs kinda like to drop off once in a while. Superglue them on if you don't want them to drop off. The knee (not ankle, sorry) guards also tend to drop off... nothing I can do about that though as using superglue for that will kill off its articulation.

Part 5.5: Waist
The front and side skirts got some changes as the Strike Noir uses mostly ranged weapons.

Part 5.6: Noir Striker

I actually missed the long part for both the cannons... OTL I hard to force remove the parts causing the very tight connections to break. With some help from trusty old superglue, I put the cannons back together nicely in the end. Phew.
I also superglued all those yellow parts on. Some of them are rather loose so I don't want to risk them disappearing on me later...

The swords are very straightforward and easy to build though.

Middle section of the backpack.
There are some small thin pieces of plastic that really needs some superglue to stay on or else they will just drop off when you move the mechanism later on.

After all that, put em' together. The sword holder is bit loose though... urk.

Part 5.7: GUNS!
Beam rifles with grenades. Painted the clear part green on the underside (not shown).

The same rifle as the Strike... kinda don't care about this one actually. XD
I painted the sensor with blue if you can see it.
The clear piece doesn't look so nice though. A bit rough on the edges.

If you look closely, one side of the sensor can be moved up and down... and yes, I lost one of the pistol's mouth. ORZ.
Oh yeah, after watching one of prime92's videos on Youtube, the mouth is lose-able. Thus, please superglue it onto the pistols or else you would lose it forever like me... @_@

Part 5.8: Extra Hands
The Strike Noir also come with 3 extra HG-ish hands. This is so that it can hold its weapons better... Bandai was too lazy to give it better hands in the first place anyways.

Part 6: Preview

Okay that's all for the first part of the review. I can say that I built this one REALLY, REALLY slow as I didn't feel the mood to build it for some odd reason. Weird. Maybe I'm just burnt out. XP

Anyways, should I try to apply the clear stickers and decals? If I do it, the next part of the review will be delayed for a while as I would like to build some others first as the clear stickers and decals could be a pain. >.>;

10 comments:

Shirogane Len said...

Haha,nice review of TT Hongli Strike Noir,hope u attach the Noir pack to Impulse in part 2,lol

moemoekyun said...

uwoo waiting for next review

rockleelotus said...

great review TTsensei! ^^

man i would be tired just from having to lay out all the pieces like that for pics lol i though TT stickers were a no-no-no, so maybe pass? but the decals should add a nice touch.

Marzz said...

I have seen for myself how suck the hongli stickers are.... But the decals... Never seen them before, looking forward to see how your "experiment" works out :D

Anonymous said...

no, don't apply them!!!
Better buy yourself a real decal than their stickers >_<
I don't even use any of them for S.Freedom.

I'm nearly buy this if not that I've bought 1/144. Maybe later, but surely I will paint them again. Don't like shiny looks for a black matte Strike Noir.

Tsukinari said...

nice review.. very detailed.. kinda like Dalong ish lolol

hm... i have to say avoid sticker... and get Dry transfer or water slide decal instead... but thats just my suggestion, coz i hate sticker ^^

keep up the good work!

chubbybots said...

I think just avoid the foil stickers :D But experiment and let us all know!! Maybe just try on a test piece first and see what the results are like :D

RJ said...

wow....u bot this kit wif only rm40++ only? tht is a lucky star for u...i seen this kit b4 and it's about rm100++...hmmmm....i think u better apply the sticker and decals...but if its doesnt fit it...better remove it, u can buy some custom sticker @ wondertoys and momo @ the spring...i think u know it alrady...heheh...cant wait to see ur next review :)

Cass said...

@Liang: I will try to put it on the Impulse. It should work out fine I believe. ^^

@moe: Hope you are patient enough this time. Haha.

@rocklee: Patience and virtue is key. It also makes it easier to put the parts together in the end anyways.

@Marzz: Hopefully it will work out... somewhat. XD

@divine & nari: This is a test for TT clear stickers and decals... I think quite a number of people would like to know if they work or no. XP

@chubbs: The foil stickers I used were just for the head and gun sensors which seems fine to me. As for the clear stickers and decals... I don't know yet. XD

@rj: Yeah, its quite hard to find a place with this kind of prices. I don't think I can get most future TT MGs at this price anyways. Haha.

Looking at the poll so far, I will indeed have to "experiment" with the TT clear stickers and decals. Well, I'm curious to find out too.

Don't expect the second part of the review to be up real soon as I will only be doing it after the timer on the poll times out, which is tonight at 12.00AM.

So, estimate day of review will be either Tuesday or Wednesday by the earliest. Just in case, I will make a short post on this later after midnight. ^^

RJ said...

haha...yeah...especially in kuching...so, what do think about this TT MG's?does it ok in 1/100 scale? i hvnt got 1...wanna try 1...i've saw the articulation is superb! love it! owh...okay..hope it will give u a good outcome! gambate!

Counter

Free Blog Counter

Note: This counter is made on the 9th of March 2009. It only counts unique hits FYI. ^^