Wednesday, April 21, 2010

Robot Damashii Turn A Gundam Review

Price: 3000 Yen

This post has been delayed for quite some time (since the photos are already taken for a while) but I feel that I have some time to spare to post it up today. =)
There isn't a need of much explanations for this one since I already did a review on the MG not too long ago.

Read on for the full review~
Note: If you're wondering, I did panel line the Turn A a bit but some shots (since I took them from time to time) may not have any panel lines or less.

Part 1: Box
Your usual box design for figures with the transparent cover in front and the details of the figure at the back.

Part 2: Box Open!
The RD Turn A comes with quite a number of parts such as;
  • Holding Hands (to hold the weapons)
  • Open Palms
  • A Solid Mustache/V-Fin (if you do not like the bendable one already used)
  • Add-on for the Back to Hold the Beam Rifle & Shield When Not Used
  • Beam Rifle & Shield
  • Alternate Vents for the Legs (clogged ones*)
  • 'Clips'/Holder for the Beam Sabers
  • Beam Sabers
  • Alternate Chest (firing missiles)
  • Turn A Itself (duh)

Part 3: Comparisons
The Turn A's box is slightly smaller than the Unicorn Destroy. Of course, the difference of 800 Yen should make it fairly obvious.

RDs are roughly 12cm in height so Turn A is rather short in this line.

It can be considered to be accurate here since Unicorn Destroy is taller than Turn A by 1.7m.

Quite a lot of difference in height when compared with the MG, eh? XP

Part 4: Up, Left, Down, Right!
The great thing about this RD is how close it is to the MG design! However, after playing with it a bit, I realized that some of the weaknesses are kept as well. ^^;

Part 5: Articulation & Gimmicks
The RD Turn A has superb articulation all around. It can also, somewhat, do a high kick! The legs also does not come off from the waist unlike the MG which is the greatest pro for me as it made it possible for me to play with it... extensively (which I did).
However, I notice that the arms cannot really hold the shield properly and will 'drop' down immediately unless you orientate the arms 'properly'. Not really a huge problem but a disappointment nonetheless.

To be honest, I wanted to show the arms holding the shield spread out but... it'd fall. Anyways, the full gimmick of the shield is replicated here. You can move it up and down as well as clip it to the arm of the Turn A (besides connecting the peg to the hole at the side of the arm). Hope you can understand that. ^^;

Even the shoulder's opening gimmick is fully replicated. As I've said before, Turn A doesn't have traditional shoulders so they don't turn around. Instead, they can open up to allow more movement headroom for the arms. The shoulder armor 'flap' at the back and move a bit as well.

Adding a bigger note, the RD Turn A has a lot of ball joints unlike the MG which uses more direct joints. Areas such as the arm to torso joint, the elbow joint, the hand to arm joint and the legs to waist joint are ball joints. They do, in fact, have very similar connections to the MG but it seems that ball joints are used to increase articulation.

Due to its small size, the back doesn't have the opening gimmick that the MG has. The beam saber holders(at the shoulder armor) works as they should though. =)

You can alternate between the activated vents (out of box configuration) or the clogged vents. I'm not really sure why they gave the clogged vents since it seems to be rather useless and not so noticeable in difference (unless you look very closely) but its nice to have if you want to recreate certain scenes from the anime. Because of the small size, it doesn't have the linked movement the MG has.

If you want, you can store the beam rifle and shield at the back of the Turn A. I find the RD more logically placed than the MG though.

Part 6: Action!
*PEW**PEW**PEW*
Beam rifle action in two possible ways of holding it. Sadly, the full gimmicks of the beam rifle was not replicated here. Not so bad though since the more important gimmicks are mostly there. ^^;

Kneeling poses anyone?

If you didn't notice, Turn A looks awesome wielding a beam saber. o.o

BURESUTTO MISSILES~~~!!!

Part 7: RD VS MG
IMO, the RD is very much a miniaturized MG. ;)
However, the major flaw happens to be the side-skirt which is rectangular and too big for the RD Turn A. ^^;

A bit unfortunate that some of the beam rifle gimmicks are not capable of being reproduced in this smaller scale. The second handle is just there to be there and can't be held unlike the MG (though it isn't easy to grip the handle for the MG anyways). There is also no cover to hide the main handle also when it gets stored. Not a biggie to me though but they could have added a small option part to cover it. ^^;

The shield is 'perfect'! Every gimmick is reproduced. ^^

Part X: Arms Installation Complete!
Due to the lack of time, I forgot to take some more delicious action shots. Then again, I think it is enough as it is as this isn't a picture spam post. XD

Part 8: Conclusion
Pros
  • Great articulation
  • More articulated than the MG
  • Legs DON'T fall off
  • More logical placements of the beam rifle and shield in 'standby'
  • The beam sabers look like they glow!

Cons
  • Not every gimmick is reproduced
  • Arms are not strong enough to hold the shield up properly
  • Inaccurate side-skirts
  • No core fighter gimmick although it can be removed
  • No cow!
  • No Gundam Hammer!*
*Robot Damashii released a 'missing' weapons set for the Turn A series recently however.

Overall, this figure is very decent. It is very good for me as I got it for a great price, lower than RM100 for one thing. Even though it doesn't reproduce all the gimmicks (mostly due to the size), it does well in reproducing the ones that do count. Oh wait, except Moonlight Butterfly sadly as you'll need to get a limited Turn A for that (or separately) - which will be hell expensive if you don't live in Japan or have connections.

If you like the Turn A and would love to play around with it without its legs falling off, this is the one for you!

Until the next review~ =)

13 comments:

Zoidiect Archaea said...

hmm looks nice~

thought so you will say that

NO RD COW~!!! lololololololololol

(uh wait...no comic?)

Cass said...

Yeah, no comic. Kinda no idea and no time for now. Unless I can get myself a RD Turn X... I 'may' have an idea at that point. Fufufu.

Marzz said...

WHERE'S THE RD COW????
No cow?

Cass said...

Yeah, no cow. )=

mangyver5223 said...

Compared to MSIA, its an advancement ^_^

Shirogane Len said...

Nice gimmick,but not enough details...= =

Cass said...

@gyver: Yup. =)

@Liang: Not enough details? I personally find it to be quite detailed though. ^^;

heathorn said...

again, nice review by rndm!

LOL, no cow ^^
turn A has interesting design actually, but one thing I find strange is the moustache. If the head is not like that, maybe it will be more accepted by gundam fans.

Cass said...

@heat: Thanks! ^^
Well, I find the 'different' design refreshing and well, different. XD
If Turn A had a more regular design, the uniqueness of the story may be lowered IMHO. >.>

Siroh32 said...

*wave* I just got my first two RD figures. Both are the Turn A Gundam; the very first being the MB edition, but I don't think I'll open it just so I can say I've got a rare figure in mint condition. I decided to get some MB parts for my regular Turn A, though I've only used as much as the stand so far.

There's something to be said about seeing the actual deal with your own eyes for the first time. I've had similar experiences with my GFF Wing and EMSiAs and other items (in varying degrees). I thought it'd be closer to the 1/144-scale despite being unscaled, but the size looks like it fits at home with my MSiA figures, and fits with some people's comments about how RD became a natural evolution.

The figure really does ooze with articulation; putting my 1/144 Turn A Gundam to shame (even after I modified the legs). I'm trying to learn how to put the beam saber holders on right now, but I think I'll have loads more fun with this than with my TAG model.

Aside from a nitpick about the bottom of the feet being a little inaccurate (which at least isn't the case with the MB edition, according to some pictures I've seen, even though I can open up mine and see for myself), the figure is pretty much accurate to the real deal. I like how much level of detail are in some areas for a figure smaller than a 1/144-scaled model (again putting my Turn A Gundam model to shame), despite it not being super-detailed like a GFF. I keep wondering, though, if the eyes are orange-yellow or orange-red, because from photos before I thought they were red. But then they change in the anime too. *shrug*

I'm starting to like the Nanoskin version out there, though, since while you can't nickname it the "White Doll" if you're nitpicky about the colors, it does make the figure look more like a giant metallic robot. I'm sure you can make the regular one look that way too if you can use a camera right, though.

I've been a reader on another blog (Gunpla Inochi) where I've seen a mixed review of the RD Turn X, mainly because of the size, price, and simpler looks of RD figures. While I admit the price may be a bit much for my taste, I can stand it if I want it, and I'm pretty glad I got my two RD figures. Maybe I can follow suit with the MG Turn A sometime sooner or later, even though I've hit a snag that prevents me from taking my time building some new ones I've already got.

Siroh32 said...

*wave* I just got my first two RD figures. Both are the Turn A Gundam; the very first being the MB edition, but I don't think I'll open it just so I can say I've got a rare figure in mint condition. I decided to get some MB parts for my regular Turn A, though I've only used as much as the stand so far.

There's something to be said about seeing the actual deal with your own eyes for the first time. I've had similar experiences with my GFF Wing and EMSiAs and other items (in varying degrees). I thought it'd be closer to the 1/144-scale despite being unscaled, but the size looks like it fits at home with my MSiA figures, and fits with some people's comments about how RD became a natural evolution.

The figure really does ooze with articulation; putting my 1/144 Turn A Gundam to shame (even after I modified the legs). I'm trying to learn how to put the beam saber holders on right now, but I think I'll have loads more fun with this than with my TAG model.

Siroh32 said...

(Oh, wait a sec... I should've ignored Google when it read that my initial oh-so-long--and I do apologize for that--comment was too large to be posted. And now I see it above my halved version. *shrug* Sorry about that.)

Cass said...

Ah, it's alright.

I see that you're quite the fan of the Turn A and you even bought two of them. ^^ It is okay if you like it though so there's no problem there.

Well, RDs seem to look a little pricey but considering they are built and well made (from my own experience), I say they are worth the money you pay for. At least it isn't like a certain Lancelot Ver.Ka...

Counter

Free Blog Counter

Note: This counter is made on the 9th of March 2009. It only counts unique hits FYI. ^^