Because of this and that, I took out the HG 00 Qan[T] as well as the 2nd hand one I got from my friend not too long ago. Decided to continue with the parts placement (obtained from the bootleg HG 00 7 Swords) onto the 2nd hand HG 00 Qan[T] in order to continue my Gundam design - Spark Gundam. Since this will be my "first time" doing anything major, if I do proceed within the near future, I'll try not to "over-attempt" the mods and overall build design. ^^;
Note: It won't exactly look the same as what I've drawn, I believe, as I'm not experienced enough to do until that "image" I have in mind.
Wednesday, January 25, 2012
Update on Spark Gundam? Plus Double Binder 00 Qan[T]
Saturday, September 17, 2011
Spark Gundam Rough Build Setup
Roughly, this is how it will be but I can't really use the 00 Gundam's body even though it is possible. It adds more work than necessary so I'll be waiting for Gao Gao to release their 00 Qan[T]. Who knows, I might even make a dual-wing-binder 00 Qan[T] for fun along the way too. =P
The Spark Gundam design goes like this;
- Part of the Exia family, thus is focuses on melee and speed as well.
- Incorporates latest GN technology by utilizing a miniaturized Twin Drive in the chest location.
- Backpack wings are inspired by V2 Gundam, which the Spark Gundam is overall based on asides from Astraea-Exia-00-Qan[T].
- The left arm has a prototype armament - GN Beam Shield. It can be a beam shield or a beam vulcan. The vulcan can used to form an unexpected beam saber as well.
Sunday, August 22, 2010
Long Awaited Omake - AHEAD VS Aizu VS Astraea Type F (AAA)
Sorry this took a while for me to actually put up since some of you waited for it ever since that HG Astraea Type F review I did a few months back. It wasn't really easy for me to do so I did this pretty linearly with not so much poses for the painted HG Aizu Gundam. However, I hope you enjoy it... I can say I rushed a bit near the end with non-stop action though. XP
Read on!
Posted by
Cass
at
1:00 AM
10
comments
Labels: 00, ahead, aizu, astraea, gundam, hg, mod, painted works, photoscape, photoshop
Sunday, August 15, 2010
HG 1/144 1.5 Gundam (Black Ice Custom) Review - Part 2
Sorry that this post took a while to get up. I was a little preoccupied with a certain SCII for a bit the past few days. Played through the campaign but I kinda feel meh about the story. Roughly a good end I can say.
At any rate, there won't be as many shots this time around since a painted Gunpla is hard to move around without scratching it too much. That and the body is a bit hard for the camera to see properly. XP
I did have to touch up some sections, using marker, from time to time due to small scratches though - just the black parts. I can't really do anything for the other colored parts though. Ah well, but the metallic paint seem to be more scratch resistant than the normal paint.
Note: The ones with the white backdrop are newer since I felt a lot of the photos taken after a while were "too dark".
Read on.
Posted by
Cass
at
9:33 PM
8
comments
Labels: aizu, custom paint job, gundam, hg, mod
Thursday, August 12, 2010
HG 1/144 1.5 Gundam (Black Ice Custom) Review - Part 1
This review is much different than usual since I modded and painted this kit so it isn't a OOB review unfortunately.
MS Brief
The 1 Gundam or Ai Gundam appeared in the Gundam 00P side-story. It was originally meant to be used for Celestial Being's interventions but a rebellion happened thanks to Besides Pain and it end up being wrecked. It later appeared in Gundam 00I utilizing a fake solar furnace instead. It was, luckily, taken care by Fon Spaak. The 1.5 Gundam or Aizu Gundam, an upgraded model, was recently shown through the model kit release as well as in Gundam 00P Special Edition. I might be wrong or not so accurate since I'm doing this based on memory.
MS Specs
CB-001.5 - 1.5 Gundam
Pilot: Besides Pain/Leif Recitativo*
Height: 23.3m
Weight: 68.9t
Armaments: GN Buster Rifle, GN Beam Saber (2), GN Shield, Alvaaron Cannon**, Binder Rifle**
*Leif Recitativo gets "possessed" by Besides Pain.
**The weapons of the wing binders. This is where the data of the Alvaaron came from anyways.
Why did I decided to mod it?
It started when I finished building the HG Reborns Gundam a while back. I was quite disappointed with the hips articulation since the kit has so much promise. It was okay to me at first but the ball joints start to sag horribly after a short period of time.
Then came the HG 1.5 Gundam or Aizu Gundam which I prefer to call it. Ever since the Ai Gundam was shown in 00P, I liked it, more so when it was considered as "Gundam Exia's Brother Unit". At that point of time, I had an un-built HG 00 Gundam body due to the double purchase of HG 007S/G. I didn't need it so it was a good opportunity for me. To be exact, I wanted to do it for the HG Gundam Exia but it was much harder to do and required more effort. For the Aizu, it was more straightforward and I can do it with what I already have in possession. Thus, with the semester break, I did it.
Took me a while since I needed to get some spray cans as I decided to paint it after modding to make it more "complete". I don't really like half-assed things. Since I'm doing quite a major mod so I better go all the way, right?
More as you read on.
Sunday, August 8, 2010
"Black Ice/ブラックアイズ Complete!




Not bad for a second try, huh? Not as great as I would like but good enough for a novice like me. ^^;
If you're wondering why the backpack isn't on yet, that's because of a mistake I made with the backpack... due to the paint, it wasn't move-able so I had to thin out the area after forcing it off (the GN Drive slot area). Fixable so it isn't a big deal in the end.
I also decided to change the orientation of the waist unit so the rear skirts becomes the front skirts while the front skirts become the rear skirts. A better method of hiding the hips, ne?
Sorry about the dust in the photos, dust just accumulates like bunnies on my work desk. :/
I might not post the review that quick but expect it sometime next week. Huu... looks like I'm going to Spring tomorrow for a "visit". *Checks reserves.* <_<>_>
Posted by
Cass
at
5:47 PM
16
comments
Labels: aizu, custom paint job, gundam, hg, mod
Tuesday, August 3, 2010
Next Time...
Anyways, have ya all seen the latest 00 Movie trailer? Or perhaps the song PV? With that said, I'm kinda hyped to see what is actually going on in those scenes. Some have speculated there are going to be aliens, perhaps even mechanical beings. Hm, interesting but we'll know the real deal when the movie comes around.
Also, looks like Setsuna will indeed use the 00 Raiser (Repair) in the movie with the GN Sword IV. Haha, another kit from Bandai will come soon. Marzz, are you gonna get it? XD
After seeing the trailer, the Zabanya and Harute really does stand out. Zabanya with its bits and Harute with its six eyes. o.o Raphael, without the "backpack unit", is spewing out Tau particles which gives an idea about its gimmick...
Okay, that's all for now. Anyone played the translated Tales of Innocence yet?
Friday, July 30, 2010
Aizu KAI Additional Preview
Taking a short break now since my finger got a blister (the non-painful one) from the drilling work. ^^; I did have to hold drill bits (the sharp area) with my bare fingers. I guess it can't be helped.
Anyways, I managed to get the body built and sanded but the wing binders and armaments are yet to be put together.
UPDATE: Mod explanation here.
Crazy "Ice" Plan Underway (Preview)
You've seen me do knee mods, now it is time for a hip mod! Not going into details yet but I can say that the hip mod doesn't look all that nice but it works. ^^;
Well, maybe if you have some putty and pla-plates you can do something better than me. XP
Actual details later after the superglue hardens and if I need to use some epoxy to reinforce the pelvis area.
Since that 00 body now is un-build-able, maybe I should transfer some of those still unused weapons and parts to a certain Gundam...
Friday, July 23, 2010
HGAW 1/144 Gundam X Review - Part 2
Been playing too much online games and other important real life matters. Only one month for my semester break left and I haven't even touch Aizu yet. Then again, it has been raining everyday. Maybe I should do a straight build (without detailing) first (with my plans in motion too) and take off the parts for painting when the weather is good again.
The GX is actually quite fun to play with. As such, some "unusual" poses are taken which are near the bottom of this post. >D
Read on!
EDIT: Added another "pro" I forgot to mention; "It feels quite solid".
Tuesday, July 20, 2010
HGAW 1/144 Gundam X Review - Part 1
Looks like everyone guessed right for my preview post. Obvious is too obvious. XP However, there is more than what the eye can see to that certain knee mod. Read on for the first part which encompasses the building process as usual as well as a how to make the GX's legs bend better.
MS Specifications:

MS Brief:
Gundam X AKA GX-9900 AKA GX is a Gundam that was created right before* the After War era and was found 15 years later by Garrod Ran who then became its pilot ("If this works, I believe in God!" ~ Garrod Ran). Unlike what you can already see from the boxart, a Gundam wielding an moon-powered BFG, it also has a bit system. This bit system is unlike the usual flying small stuff that goes around pewpewpew but is actually a whole army of mass produced version of the GX. Of course, you need to have a certain degree of skills and Newtype potential to actually do it.
*Technically, the GX caused the end of war and started the After War era. Watch series for more!









