Showing posts with label swords. Show all posts
Showing posts with label swords. Show all posts

Saturday, February 11, 2012

Striking Filler

One week left for my break and I realized I haven't done what I've promised to do so I'm gonna toil away on some responsibilities for a while again... I blame my frequent outings lately. Can drive, have car then spend too much time outside. D=

MG 1/100 Sword Strike Gundam.

MG 1/100 Strike Gundam.

At any rate... has anyone watched the rather mind**** BRS anime series thus far?

Tuesday, January 31, 2012

Gao Gao (TT Hongli) HG 1/144 00 Seven Sword/G (007S/G) Review - Part 2

This is a late continuation of this post.

After looking through my blog, as I was updating the review buttons, I found out that I've yet to conclude this review. Looking at the date of publishing, it was probably due to other things that kept me preoccupied. Well, time to get back to the game here as I don't like to leave things unfinished unless I come to a dead end for it that is. ^^;

The model kit has been built for over 3 months and parts have been swapped around so the joints, particularly the arms, are not as tight anymore. As per usual, time does make model kits less firm as when it was just built. Ah well. At any rate, I did reinforce the joints (right arm to shoulder and forearm peg connections) for this review. The forearm part was already evident since built though.

Note: All photos are taken by the Samsung Galaxy S II @ 8MP downsized to 25% at 70% JPEG compression. I so need to get a touch-screen to focus camera next time. Much more in tune to my photo taking tendencies. Current photo-taking setup utilizes two LED white lights - left and right.

Read on!

Wednesday, January 25, 2012

Gao Gao (TT Hongli) HG 1/144 00 Seven Sword/G (007S/G) Review (Unfinished)

Price: RM3X

Time for the next review~ TBH, I was pretty excited when building this due to reasons as you read on the review, although more obvious in the second part later. Even if this is the second time I'm building practically the same kit and fourth time building a 00 Gundam, I don't feel any quirks about that. Now, onto the review.

The price this time is higher than usual but it seems the prices of bootlegs have increased lately so there isn't much I could do about that. Fortunately, it is still relatively affordable, especially for what you'll find inside the box and my impression on it proves positive.

You may read my previous review on the original Bandai version of his model kit here which covers some information in regards to the Gundam itself as well. I won't be repeating it here.

Specifications
I find it amazing that Gao Gao/TT Hongli is getting better with their Engrish, seriously. It makes building easier as the instructions have Engrish words that are understandable by the very least.


Originally Posted: 8 September 2011
Latest Update: 25 January 2012
Reason: Realization of Incomplete Review

Read on for the rest of the review~

Tuesday, September 6, 2011

Gao Gao (TT Hongli) HG 1/144 00 Seven Sword/G - Impression


With just this single image, a full review feels redundant now. Okay, I'll still do it regardless.

Based on this photo, the Gao Gao 007S/G has an incredible polycap strength - being able to hold the GN Buster Sword II without much effort asides from needing a stand to stablize the body. o.o
This is actually attributed to its hard and tight polycaps which do seem to be doing the job and more greatly, to my pleasure even. I couldn't manage this without support for the original Bandai release believe it or not. Very interesting, no?

More later.

posted from Bloggeroid

Sunday, September 4, 2011

TTGG 007S/G Complete (Ninja Build)


Just finished it an hour ago and right now I'm on the verge of going to sleep. Nonetheless, here it is!

The one thing that makes this one annoying to build was its really tight and stiff polycaps. However, that brings an interesting benefit that can only be felt after you complete it which I'll cover in its eventual review.

Until the next post!

posted from Bloggeroid

Thursday, December 30, 2010

Robot Damashii Gundam Exia Review - Part 2

Quickly continuing the previous part of the review, here's the rest of it.

Robot Damashii Gundam Exia Review - Part 1

Price: 2800 Yen
Now, time for more Exia! If you are a FB regular, you might already guessed that this review is next up but anyways, here's the review.

I bought this for RM90 at Hobby Kingdom (Star City, KK, Sabah) and it was the very last box. Never thought I could get one but luckily I was. A big thanks to Evaritus Lau, once again, for this opportunity. :X
This is my 13th Gundam Exia and, well, that's quite a lot and I'm still missing the HG 1/144 GN-Arms Type E, NG 1/100 Gundam Avalanche Exia, MG 1/100 Gundam Exia (Normal), MG 1/100 Gundam Exia Trans-AM (only if I can get that 80% discount...)... yeah. Not really going to gun to get them all but just those I come across. Not crazy enough to go all out. XP

Gundam Exia, one of the most shown Gundam on this blog needs no introduction anymore. It is piloted by Setsuna F. Seiei and it comes with seven swords. One of the most extreme sword motive Gundam to date, if I'm not mistaken.

This first part covers the box, box open, articulation and gimmicks. Action poses and the conclusion will be covered in the next part. Most of the photos were taken in a room at the Promenade Hotel Apartment before my camera was sent off. So, you can see the annoying black spot at the following photos. ^^; That also explains the lack of comparison shots minus the mint bottle which I bought while I was there.

EDIT: Forgot to insert neck shot in this part.

Tuesday, August 24, 2010

I Wish Setsuna Would Use This in the Movie

Switched the shoulder "verniers" with the GN Drives from the 007S/G and put on the weapons you see above. Whatever that can fit though. XD

After completing this kit, I totally love this alternate configuration of the Exia though the legs are a bit bulky and not so easy to move about. Well, more on that on a review post later.

~Rant~
Considering how the Exia R2 only lost an arm and a GN Sword in the last episode of Gundam 00, I don't get the reason why it isn't available in the movie from whatever we have seen so far. Besides that, the 00 Raiser is very beat up (arguable that it was fixed up as the 007S/G in the 00V Senki) yet it can refitted with GN Condensers that can do Trans-AM Burst. Well, maybe Exia was used to make the 00 Qan[T] since Celestial Being faced a financial crisis... or so the Gundam with a mass amount of weapons tells us otherwise (Zabanya).
~End Rant~

Enjoy the teaser post~

FYI, my break is over already so I'm back to school again. Not so busy just yet but considering how I don't really post that often even during the break, I don't think there will be a problem with my blog postings, not anytime soon anyways.

Saturday, April 10, 2010

HG 1/144 00 Gundam Seven Sword/G (007S/G) Review

Price: 1600 Yen

I decided to fit this one into one single post this time instead of two separate posts like I usually do. This is because I do not have to review the articulation and gimmicks of the 00 Gundam (the base body) anymore as I have already done it in a previous review here.

Specs:
GN-0000GNHW/7SG
Height: 18.3m
Weight: 65.1t
Armaments: GN Sword II Blaster, GN Buster Sword II, GN Sword II Long, GN Sword II Short, GN Katar (2). GN Beam Saber (2)

MS Brief:
After then end of Gundam 00 Season 2, Celestial Being suffers from monetary problems as well as the lost of one GN Drive. Because of that, the 00 Gundam has lost its Twin Drive capabilities and is solely running one one GN Drive and a condenser on the other side (the side with the GN Buster Sword II). Furthermore, it can only use Trans-AM for a very limited time of 0.03 seconds.

EDIT (6/9/2011): I just noticed I put the hilt of the GN Buster Sword II upside down which made it unable to close in the first place. My bad.

Note: The third preview shot requires the XN Raiser and another 007S/G to be do-able. ^^;
There is also a short comic strip near the end of this review. =)

Tuesday, April 6, 2010

HG 00 Gundam Twelve Swords Two Guns (0012S/2G) Preview

Mwahahahahahaha! Finally! I can do it too! I feel so happy today. :D

Nothing much to say except I tried to detail the HG 007S/G as much as I can with my Gundam Markers and did not paint the XN Unit due to paint limitations. I'll try to do that later once I get my hands on proper equipment or when I'm ready since I don't want to screw up the not so easy nor cheap XN Unit.

What's on the 00 now? O.O
2x GN Sword II Blaster
2x GN Buster Sword II
1x GN Sword II Long
1x GN Sword II Short
2x GN Katar
2x GN Beam Saber
2x GN Sword II
2x GN Buster Sword III

That's a whooping total of 14 swords! It may not be practical but I really wanted to try equipping it on though I can say the swords can rub against each other quite a lot now. ^^;

That's all for now. The 007S/G (normally equipped) has some outside work tomorrow as I'm gonna put it up for display during the SAMS Club Exhibition Day. A certain unfortunate HG will accompany it as the always used on this blog as a victim of a buster sword attack this time. X3

Hopefully I'll be able to do the review by the end of this weekend. There are some things I definitely must say on this model kit.

Counter

Free Blog Counter

Note: This counter is made on the 9th of March 2009. It only counts unique hits FYI. ^^